Prince Castle FLAME KING BROILER Install & Operation Manual page 14

B.9 Restraining Device Installation and Use
This high-strength restrainer is to be used with all moveable appliances on casters. It fully complies with American Gas
Association requirements. References: Z21.69, Z83.11, and Z21.41 with current revisions. Installation is quick and posi-
tive. In Canada, device is in accordance with CAN 1-6.9-M70 Quick Disconnect Devices for use with gas fuel, and CAN
1-6.10-88 metal connectors for gas appliances. Correct length for any appliance is simply a matter of loosening two ad-
juster clips (1) and re-tightening. (3" to 6" shorter than appliance connector is desired length.) Restrainer is made of
heavy duty steel cable with a strong scissor hook (2) at one end and an equally strong spring hook (3) at the other.
Cotter pin (4) is supplied to secure the installation. For proper attachment to the broiler, use the supplied hardware to
attach the device to the hole in the bottom-left rear corner plate of the broiler stand.
NOTE: If disconnection of the restraint is necessary, reconnect the restraint after the appliance has been
returned to its originally-installed position.
IMPORTANT: This Restraining Device should be ordered with every connector for Movable appliances.
B.10 Pre-Operation Check
Be sure that all parts are installed in the proper location.
-Ventilation is turned on
-Broiler is plugged in
-Gas line is connected
PN: 1000-605 | User Manual – Prince Castle Flame King Broiler
Rev: A
Updated: 4/13/2022
FLAME KING BROILER
B. INSTALLATION
14