Install The Printhead - Canon imagePROGRAF iPF825 Setup Manual

Instructions for Models That Include the Stationary Output Stacker as a Standard Accessory
4
Lift the Ejection Guide.
Instructions for Models That Include the Stationary Output Stacker as a Standard Accessory
6
Lower the Ejection Guide.
8
Plug the power cord into the Power Supply Connector on the back
of the printer.

Install the Printhead

1
Press the Power button to turn on the
printer.
4
When Open top cover. is displayed
on the Display Screen , open the Top
Cover .
Instructions are now shown on the
Display Screen regarding Printhead
installation.
Next, install the Printhead.
2
When the following screen is displayed,
press ▲ or ▼ to select the language
used on the display screen, and then
press the OK button.
OK
5
Pull the Printhead Fixer Lever forward
all the way to open it completely.
5
Attach the four Ejection Support s (a) on the back of the
Ejection Guide .
a
7
Close the Top Cover .
9
Plug the power cord into the outlet.
3
Language
English
Français
Italiano
Deutsch
Español
Language
English
Français
OK
Italiano
Deutsch
Español
6
5
Make sure your local time zone is
selected, and then press the OK button.
Time Zone
0:London (GMT)
+1:Paris,Rome
+2:Athens,Cairo
+3:Moscow
+4:Eerevan,Baku
+5:Islamabad
Time Zone
0:London (GMT)
+1:Paris,Rome
+2:Athens,Cairo
OK
+3:Moscow
+4:Eerevan,Baku
+5:Islamabad
Lift the Printhead Fixer Cover to open it
fully.