Canon imagePROGRAF iPF825 Setup Manual page 14

12
Click Quit.
14
Select the printer to prepare and click
Next.
• To register the printer by entering its IP
address, click Registering IP Address.
MEMO
Enter the IP address of the desired printer
in IP Address and click Next.
17
Click OK.
• If the same model of printer is already
registered on the computer, a screen is
MEMO
displayed for printer selection. Select the
desired printer and click Next.
20
Double-click the iPFxxxx Manual
Installer icon in the CD-ROM.
(iPFxxxx represents the printer model.)
23
After reading the software license
agreement, click Continue .
26
After installation is complete, click Quit .
The User Manual is now installed.
The printer driver is now installed.
Next, select the printer to set up.
15
After entering your preferred name for
the printer in Printer Name and the
installation location in Location, click
Register.
18
The following screen is displayed and
paper information is updated. When the
paper information has been updated, the
screen is no longer displayed.
21
Select the region where the printer will
be used and the language of the user
manual to install, and then click OK .
24
Click Agree .
14
13
Click Next .
16
Click Finish.
• To register another printer, click Continue
Registration, and repeat steps 14–16.
MEMO
Install the User Manual
19
Next, install the User Manual.
Insert the provided User Manuals CD-
ROM in the CD-ROM drive.
22
Check the message and click Continue .
25
Click Install .