Canon imagePROGRAF iPF825 Setup Manual page 10

11
After reviewing the installation results on
the Complete Installation window, click
Next.
When the printer cannot be found on the network
If your printer cannot be found when
connecting to the network for the fi rst
time, setup an IP address for the printer
and then confi gure it on the printer.
When ink fi lls the system for the fi rst
time, after printhead adjustment is
fi nished, specify the IP address on the
printer's control panel.
• When ink fi lls the system for the
fi rst time, do not operate the
printer until printhead adjustment
is fi nished.
4
Press ▲ or ▼ to select IP Setting, and
then press the ► button.
5
Press ▲ or ▼ to select IP Address, and
then press the ► button.
9
In the Search Results window, select
Specify the IP address of available
printers in the network and click Next.
The IP Address Specifi cation window
appears. Follow steps 8-11 on page 12
to fi nish installing the printer driver.
• If the following screen appears, click Retry
and select Specify the IP address of
MEMO
available printers in the network on the
next screen that appears.
12
In the Finish window, select Restart my
computer now and click Restart.
1
Press the Menu button to display MAIN
MENU.
OK
6
Enter the IP address.
1. Press ◄ or ► to move the cursor (_)
to each fi eld for entering numbers.
IP Address
L/R
Up/Down
[OK] / [Stop]
2. Press ▲ or ▼ to enter the number,
and then press the OK button.
• Holding down either the ▲ or ▼ keys
continually increases or decreases the
MEMO
value.
Next, follow steps 12-16 on page 8 to
install the User Manual.
10
13
The printer driver settings take effect
after the computer restarts. The printer
driver is now installed.
An iPFxxxx Support desktop icon is
created after installation.
(iPFxxxx represents the printer model.)
Next, follow steps 12-16 on page 8 to
install the User Manual.
2
Press ▲ or ▼ to select Interface Setup,
and then press the ► button.
3
Press ▲ or ▼ to select TCP/IP, and
then press the ► button.
7
Press the Online button.
8
Press OK on the registration
confi rmation message that appears.
The IP address is set on the printer.
Next, restart installation of the printer
driver.