Table of Contents
Advertisement
Using the Single Battery Charger (Optional)
Using Quad Battery Charger (Optional)
Connecting the cables
1. Connect the power cord to the Adapter, and Connect the
Adapter to the power connector of the quad battery charger.
2. Plug the power cord into a power Outlet. Input power is 100
~ 240VAC, 50/60Hz, 1.0A.
3. When the power is supplied, the yellow, green and red LEDs
are on for three seconds and do the self-test.
Warning
10
Use only designated AC/DC Adapter. (12VDC, 3A
1. Connect the power cord to the battery charger.
2. Connect the battery charger to the power
connector of the cradle.
3. Plug the power cord into an electrical outlet.
4. Insert the battery into the cradle until it clicks
into place.
)
Classification: Avery Dennison - Public
Advertisement
Table of Contents
