Camera Body - Canon PowerShot Pro 90 IS Software Starter Manual

The LCD monitor can also be positioned as below.
Open the LCD monitor left 180 degrees
1
and tilt it 180 degrees toward the lens.
• In this position, icons and messages do not
appear on the LCD monitor.
• The image shown on the LCD monitor is
automatically flipped and reversed so that it
appears correctly from in front of the lens.
Fold the LCD monitor back against the
2

camera body.

• Fold it until it clicks into place against the
camera body. If it is not fully closed, the image
will appear reversed and icons and messages
will not display.
• Icons and messages will appear and images will
show properly (not reversed) when the LCD
monitor is folded right against the camera until
it clicks.
35
Basic Functions