Preparing The Camera; Charging The Battery Pack - Canon PowerShot Pro 90 IS Software Starter Manual

Preparing the Camera

Charging the Battery Pack

Use the following procedures to charge the battery pack the first time and
subsequently when the low battery icon (
Battery
Lock
Terminals
Connect to an
Electrical Outlet
Orange
Indicator
1 Turn the main dial to
Slide the battery cover lock in the
2
direction of the arrow and lift to open
it.
Press the battery lock in the direction of
3
the arrow while inserting the battery
pack, then close the battery cover.
• Insert the battery pack until it locks into place.
Attach the power cord to the compact
4
power adapter and plug it into an
. ..
electrical outlet.
Connect the DC plug of the compact
5
power adapter to the camera's DC IN
terminal.
• The indicator on the back panel will flash orange
while the battery pack is charging and change to
steady orange when it is approximately 90%
charged. If it is charged for approximately two
more hours, it will become fully charged and the
indicator will switch to green.
) and Lb ( ) message flash.
Preparing the Camera
.
19