Using The Wireless Controller; Installing The Battery - Canon PowerShot Pro 90 IS Software Starter Manual

Using the Wireless Controller

Installing the Battery

Install the button battery (CR2025) into Wireless Controller WL-DC100 before use.
• Be particularly careful to keep the button batteries out of the reach of children.
Seek medical assistance immediately if a child swallows a battery since corrosive
battery fluids could damage the stomach or intestinal wall.
1
2
Negative Terminal (-)
Removing the Battery
If you should dispose of your camera, first remove the button
battery for recycling according to the recycling system of your
country.
106
Using the Wireless Controller
Place your fingertip on
1
in the direction of the arrow while
placing another fingertip on
removing the battery holder.
Place the button battery in the battery
2
holder with the negative terminal (-)
facing up.
Replace the battery holder into the
3
wireless controller.
To remove the button battery, pull it in
the direction of the arrow.
and press it
1
and
2
Bij dit produkt zijn batterijen
geleverd. Wanneer deze leeg
zijn, moet u ze niet weggoolen
maar inleveren als KCA