Manually Setting Image Characteristics - Canon PowerShot Pro 90 IS Software Starter Manual

Manually Setting Image Characteristics

The ISO speed, contrast, sharpness and saturation settings can be adjusted for shooting.
• This setting can only be selected in the ,
the ISO speed cannot be set to AUTO.
• The setting is not cancelled when the camera is turned off.
1
In the [
the above items.
• See Selecting Menus and Settings (p. 38).
Select a value for the item and press
2
the Menu button.
ISO speed
• Switch speeds when you are shooting in dark
areas or want to use a fast shutter speed.
• You can select from 50, 100, 200, 400 and AUTO.
• The default setting is ISO 50.
• When AUTO is selected, the camera
automatically adjusts ISO between 50 and 100
only.
• Higher ISO speeds increase the image noise. To
take clean images, use as low an ISO speed as
possible.
Contrast
• Select from - (Weak), 0 (Neutral) and + (Strong).
Sharpness
• Select from - (Weak), 0 (Neutral) and + (Strong).
Saturation
• Select from - (Weak), 0 (Neutral) and + (Strong).
Shoot the image.
3
Shooting - Selecting Particular Effects
(Rec.)] menu, select one of
, or modes. In the mode,
77