Camera Body; Switching Between Display Modes - Canon CDI-E075-010 User Manual

The LCD monitor can also be positioned as below.
1
2
In Replay mode, images do not appear reversed. Also, icons and messages always
show properly.

Switching between Display Modes

Pressing the
2 Shooting Mode
Pressing the
the button is pressed.
On (No Information) ➝ On (Information View)* ➝ Off
*Depending on the LCD monitor´s position, the information view may not display.
Open the LCD monitor left 180 degrees
and tilt it 180 degrees toward the lens.
• In this position, icons and messages do not
appear on the LCD monitor.
• The image shown on the LCD monitor is
automatically flipped and reversed so that it
appears correctly from in front of the lens.
Fold the LCD monitor back against the

camera body.

• Fold it until it clicks into place against the
camera body. If it is not fully closed, the image
will appear reversed and icons and messages
will not display.
• Icons and messages will appear and images will
show properly (not reversed) when the LCD
monitor is folded right against the camera until
it clicks.
button switches the LCD monitor display mode.
button cycles the LCD monitor to the next mode each time
33