View The Recorded Image - Canon PowerShot Pro 90 IS Software Starter Manual

To Immediately Delete the Displayed
Image
1. Press the button while the image is displayed.
2. Press the arrow on the omni selector to select
[OK].
3. Press the Set button.
Turn the mode dial (upper dial) to the
6
desired shooting mode.
The easiest way to snap an image is to select the
mode (p. 40).
Compose the image and focus.
7
Aim the camera and lightly press the shutter
button halfway. Two beeps will sound when the
autofocus is set (p. 36).
Shoot.
8
Press the shutter button all the way. You will hear
the sound of the shutter close when the shot is
complete (p. 36).
9

View the recorded image.

The recorded image will display for approximately
2 seconds. Keep your finger on the shutter
button or press the Set button while the image is
displayed to continue to display the image after
the shutter button is released (p. 42).
9
Quick Start