Using The Semi-Hard Case (Optional) - Canon PowerShot Pro 90 IS Software Starter Manual

Using the Semi-Hard Case (Optional)

The semi-hard case protects the camera from shocks and dirt. Attach it with the
following procedures.
Case Holder
• The pocket at the back of the semi-hard case can conveniently be used to store CF
cards, the wireless controller or the lens cap.
• The appearance and specifications of the optional semi-hard case may vary by
region.
30
Preparing the Camera
Semi-Hard Case
Screw the case holder screw into the
1
tripod socket on the bottom of the
camera.
Fasten the snap on the bottom of the
2
semi-hard case to the corresponding
snap on the case holder.
Fasten the snap on the back of the
3
semi-hard case to the snap on the back
of the case holder.