List Of Messages - Canon PowerShot Pro 90 IS Software Starter Manual

List of Messages

The following messages may appear in the LCD monitor or viewfinder.
Busy...
No CF card:
Cannot record!:
CF card error!:
CF card full:
Naming error!:
Change the battery pack:
No image:
Image too large:
Incompatible JPEG format: You attempted to replay an incompatible JPEG file.
Corrupted data:
RAW:
Cannot magnify!:
Cannot rotate:
Image is being recorded to, or read from, CF card.
You attempted to shoot or replay images without a CF
card installed.
You attempted to shoot an image without a CF card
installed.
CF card has experienced an anomaly.
CF card is too full to accommodate more images or
print settings.
The file could not be created because there is a file with
the same name as the directory that the camera is
attempting to create, or the highest possible file
number has already been reached. In the Rec. menu,
please set [File No. Reset] to [On]. After you save all the
images you wish to retain onto a computer, format the
CF card (p. 93). Please note that formatting will erase
all the existing images and other data.
Battery charge is insufficient to operate the camera.
Replace it immediately with a charged battery pack or
recharge it.
No images recorded on CF card.
You attempted to replay an image larger than 3200 x
2400 pixels.
You attempted to replay an image with corrupted data.
You attempted to replay an image recorded in an
incompatible RAW format.
You attempted to magnify an image that was
photographed with another camera, recorded in a
different format, or edited on a computer.
You attempted to rotate an image that was
photographed with another camera, recorded in a
different format, or edited on a computer.
127
Appendices