Attaching The Strap; Attaching The Lens Cap - Canon PowerShot Pro 90 IS Software Starter Manual

Attaching the Strap

• Avoid waving the camera about or catching it on other items when suspending it
from the strap.

Attaching the Lens Cap

Pass the tip of the strap through the
inside slots in the fastener after passing
it through the camera eyelet. Take the
slack out of the strap above and below
the fastener to prevent it from slipping.
Pinch the lens cap between your fingers
and fit it over the lens casing. Always
store the camera with the lens cap on.
Preparing the Camera
29