Shooting / Replaying - Canon PowerShot Pro 90 IS Software Starter Manual

Shooting / Replaying

Remote Sensor
Shooting
Press the button on the camera until the
panel, then shoot with the wireless controller.
Replaying
The icon appears in the display panel.
• Display the
previous
image
• Replay
the movie
images
• Display the
next image
• The operable range of the wireless controller will shorten under the following
circumstances.
- When the wireless controller is used at an angle to the remote sensor.
- When strong light strikes the camera.
- When the battery is weak.
Transmitter
(1) Compose the image with the zoom buttons.
(2) Press the shutter button.
• Each press of this button cycles the LCD monitor
• In magnified mode, these buttons move the
• In index view, these buttons move the image
• The display mode changes with each press of the
• The display cycles between magnifications of
• Displays images in sets of nine (index view).
The wireless controller can be used to
shoot or replay. Use within approximately
5 m (16.4 ft.) of the remote sensor.
icon appears in the display
The camera will shoot the image 2 seconds later.
to the next display mode. The order is on (no
information) /on (information view).
magnified area around the image.
selection to another image.
button.
approximately 2.5, 5 or normal.
Using the Wireless Controller
107