Basic Functions; Turning The Power On / Off - Canon PowerShot Pro 90 IS Software Starter Manual

Basic Functions

Turning the Power On / Off

Example of the main dial
turned to (Shooting).
• Pressing the shutter button halfway will restore power when the camera shuts
down with the power save function.
Power Save Function
The camera is equipped with a power save function.
Shooting Mode:
Replaying Mode:
PC Connection Mode: displays a warning message on the computer screen
• Please note that the camera continues to consume a minimal amount of power
even when the power save function shuts it down.
• The power save function is disabled while a slide show plays on the camera (p. 86).
• You can turn off the power save function in the Set up menu (p. 103).
1 Turn the main dial left or right from the
position.
• The power is off when in the
on in any other.
powers down approximately 3 minutes after a control is last
accessed. The LCD monitor will shut off approximately 3
minutes after a control is last accessed even if the power
save function is turned off.
powers down approximately 5 minutes after a control is last
accessed.
approximately 5 minutes after a control is last accessed. The
camera will power down if no controls are used after 1
additional minute.
position and
31
Basic Functions