Selecting Images For Slide Shows - Canon PowerShot Pro 90 IS Software Starter Manual

Selecting Images for Slide Shows

You can mark images for inclusion in slide shows 1-3. Up to 100 images may be
marked per slide show. Images display in the order of their selection.
88
Replaying
Display the slide show menu.
1
Press the
2
selector to select [Program]. Press the
or
[Show 2] or [Show 3] and press the Set
button.
• A bright green bar will appear beside a show
already containing images.
Press the
3
omni selector to choose [Select] and
press the Set button.
Mark images to include in the show.
4
Single Replay
• Move between images with the
arrow on the omni selector and mark or
remove marks from images with the
arrow.
• The selection number and a bright green bar
will show at the top of marked images.
Index View
• Press the
images).
• Press the
to select an image and mark or remove marks
from images with the
• You can deselect all the images in a show by
pressing the Set button, selecting [OK] with the
or
again.
• The selection number and a bright green bar
will show at the bottom of marked images.
5 Press the Menu button.
• The image selection screen will close.
or arrow on the omni
arrow to select [Show 1],
, or arrow on the
button to switch to index view (3
or arrow on the omni selector
and
arrow and pressing the Set button
or
and
arrow.