Table of Contents
Advertisement
4. The battery may explode or cause burns
if disassembled, recharged, shorted, ex-
posed to high temperatures, or disposed
of in fire. Be sure to observe all precau-
tions indicated on the battery package.
Always keep it out of the reach of
children.
a
If the battery check symbol blinks or
does not appear in the LCD panel dur-
ing battery check, exposure will be okay
as long as the shutter releases. Film ad-
vance and rewind will be impaired by in-
sufficient battery power.
If wind or
rewind stops due to the exhausted bat-
tery, the film cartridge symbol will blink.
Film transport resumes after a new bat-
tery is loaded.
Blinking "c>" Display
There are two conditions when the blink-
ing " <3" will appear in the LCD panel.
1. If the battery is nearly exhausted, the
blinking "<3" will appear when the
shutter button is pressed
halfway or
when the battery is checked.
2. If the remaining battery power does not
show a replacement condition, but the
camera's self-test process detects an
internal malfunction, the blinking " €3"
will appear when the shutter button is
pressed halfway.*
* In this case, remove the battery once.
Wipe the battery terminals and reload
it. Check the battery again. If the blink-
ing ''<>"' still appears, the camera
needs to be examined by an autho-
rized Canon service facility.
Attaching the Strap
Thread the ends of the neckstrap through
the fixtures as shown.
57
Advertisement
Table of Contents
