Mitsubishi Electric MELSERVO MR-J4-B-LL Series Instruction Manual page 28

1. FUNCTIONS AND CONFIGURATION
Function
Master-slave operation
function
Scale measurement function
J3 compatibility mode
Continuous operation to
torque control mode
Lost motion compensation
function
Super trace control
Note. For servo system controllers which are available with this, contact your local sales office.
This is not available with the MR-J4-(DU)_B_-LL servo amplifier.
This is not available with the MR-J4-(DU)_B_-LL servo amplifier.
This is not available with the MR-J4-(DU)_B_-LL servo amplifier.
Do not change the mode by using the application software "MR-J4(W)-B mode
selection". An error appears when the mode is changed to other than the J4 mode
(standard control (rotary servo motor)).
This is not available with the MR-J4-(DU)_B_-LL servo amplifier.
This function improves the response delay occurred when the machine moving
direction is reversed.
This is available with servo amplifiers with software version B4 or later. Check the
software version with MR Configurator2.
This cannot be used in the pressure control mode.
This is not available with the MR-J4-(DU)_B_-LL servo amplifier.
Description
1 - 17
Detailed
explanation
MR-J4-_B_
Section 7.6