Canon VB-C60 Operation Manual page 97

As a rough guide, the pan/tilt mechanism can withstand 300,000 back-and-forth movements
in full-angle operation *. The total touring time is determined by a combination of moving
speed, moving range and pause duration. Set an appropriate time by referring to the table
below.
Total touring time until preset tours corresponding to 300,000 back-and-forth movements are
completed in the pan direction (rough guide)
Setting Speed (PT) to 1
Pause
Pan Direction Movement Range (degree)
(sec.)
± 50
0 11616
10 17000
20 22666
30 28333
Example: Speed (PT): 1, Pause: 30 seconds, Moving range (angle) in pan direction: If ± 50
degrees, 300,000 back-and-forth movements will be completed in 28333 hours.
* Based on our measurement standards
Tip
Preset tour is not performed while the camera is being controlled with VB-C60 Viewer, etc.
Preset tour is disabled when options such as VK-64/VK-16, VK-Lite, and Motion Detection
Setting Tool are connected to the camera.
± 100 ± 150
11475 11427
14166 13222
17000 15111
19833 17000
(Unit: hour)
Setting Speed (PT) to 2
Pause
Pan Direction Movement Range (degree)
(sec.)
± 50
0 5950
10 11333
20 17000
30 22666
Preset Setting Tool
± 100 ± 150
5808 5761
8500 7555
11333 9444
14166 11333
(Unit: hour)
2-31