Setting The Exposure - Canon VB-C60 Operation Manual

Note
Even when the focus mode is changed using Admin Viewer, it is not reflected in the
settings on the setting page.
Take note that if manual focus is set, the focus will remain fixed.
When the focus is set using Admin Viewer, the focus mode of other users will also change
to the same mode.
If a shutter speed of 1/1 to 1/4 is selected in the manual exposure mode (
[Auto] and [One-shot AF] focus modes of camera control are disabled. Switch the focus
mode to [Manual] to bring the subject into focus.
Refer to the memo in P. 1-17 for the focus range that applies when the Night Mode (
19, P. 3-32) is set.

Setting the Exposure

You can set various options relating to exposure operation.
(1) Exposure Mode
Select [Auto], [Manual], [Auto (Flickerless)] or [Auto (Shutter-priority AE)].
If [Auto] was selected for [Day/Night] under [Camera] on the setting page (
[Auto], [Auto (Flickerless)] or [Auto (Shutter-priority AE)].
For explanation on each item set in the exposure mode, see the setting page (
Performing Operations and Settings as the Administrator
P. 3-27), the
P. 1-
(1)
(2)
(3)
(4)
P. 1-19), select
P. 1-15).
3-27