Canon VB-C60 Operation Manual page 90

Preset Setting Tool
(3) Panorama Preview
The panorama images registered in the camera. are displayed. Also, the preset preview
frame (yellow) recreating the preset settings is displayed, where you can drag to resize/move
the frame and reflect the new frame in the preset settings.
(4) [Preset]
Select the preset or home position you want to set.
(5) [Not shown in viewers]
If presets are used from VB-C60 Viewer, clear this check box. If [Home position] was selected
in [Preset], this setting is grayed out (disabled).
(6) Preset name
You can enter a preset name. You can set a name in Japanese or single-byte alphanumerics. If
[Home position] was selected in [Preset], this setting is grayed out (disabled).
If names are entered in both Japanese and single-byte alphanumerics, the Japanese name is
given priority and displayed in the preset of VB-C60 Viewer. Be sure to enter a preset name in
single-byte alphanumerics.
Up to 15 ASCII characters (space or printable characters) can be used in the Preset name.
(7) [Model]
The model of the connected camera is displayed.
(8) Camera Parameter
Enter the center angle of the desired angle in [Pan] and [Tilt]. In [Zoom], enter the view angle.
Camera angle
Pan .............. Set the pan position of the camera.
Tilt ............... Set the tilt position of the camera.
Zoom ........... Set the viewing angle of the camera.
Backlight Compensation
Set [BLC] of the camera. Select [OFF] or [ON].
Focus Mode
Set [Focus mode] of the camera. Select [Auto], [Fixed at infinity] or [Manual] (
(9) [Get value] button
Load the camera angle, focus position (in the manual mode) and backlight compensation
settings currently selected in the camera, as camera parameters.
(10) [Apply] button
Apply the current preset and preset tour settings to the camera.
2-24
P. 3-26).