Canon VB-C60 Operation Manual page 115

[Log type]
Select the [Specify type] or [Specify code] check box to filter logs by type. If you don't want to
filter logs by type, select [Not specified]. Logs without log code are shown with [Not specified]
selected, when [Show all logs] is selected from [View] in the menu bar.
Specify type
Specify the log level
Select the level of logs to be displayed from among [Error], [Warning] and [Information].
Specify log output module
Select the output source module whose logs will be displayed, from among [Application],
[HTTP Server] and [System].
Specify code
Specify the log code. The entered characters are compared against all logs and only the
logs matching the code are displayed. If "A0" is entered, for example, logs starting with
"A0" are displayed.
[Date & Time]
[Specify start date & time]
When this check box is selected and a date and time is entered, logs generated on or after
the specified date and time are displayed.
[Specify end date & time]
When this check box is selected and a date and time is entered, logs generated on or
before the specified date and time are displayed.
Tip
[Application], [HTTP Server] and [System] support the log message list (
Log Viewer
P. 5-7).
2-49