Canon VB-C60 Operation Manual page 94

Preset Setting Tool
5. Click [Apply].
Check the status list to make sure the settings have been applied correctly, and then click the
[Save preset settings] button to save the settings in the camera.
Note
The preview based on the panorama preview function may vary slightly from the actual
image. After setting a preset, be sure to confirm with Admin Viewer that the preset has
been reflected correctly.
To apply the manual focus mode, manually adjust the focus while checking the actual
image using Admin Viewer. After the focus has been adjusted, set the focus using the [Get
value] button.
If the image stabilizer setting is changed after a preset has been set, the set viewing angle
will no longer agree with the viewing angle during operation (
stabilizer setting has been changed, check the preset settings again.
If a dome housing is used, be sure to set presets with the dome installed.
If the camera mounting method has been changed, set presets again.
Tip
Up to 20 presets can be set.
Changes to preset settings are not reflected in the connected viewer.
You can disable presets in VB-C60 Viewer by selecting the [Not shown in viewers] (
24) check box.
Preset positions cannot be set in the digital zoom area.
You can also set multiple presets and save them all at once using the [Save preset settings]
button.
2-28
P. 3-22). If the image
P. 2-