Canon VB-C60 Operation Manual page 27

SNMP
(1) [SNMP]
Select whether to use SNMP from [Disable] or [Enable]. When [Enable] is selected, the SNMP
Manager can reference information set in the camera.
(2) [Community Name]
Set a community name for SNMP. It is recommended that you change the default community
name to ensure security of the system.
(3) [Administrator Contact Information]
Set contact information (e-mail address, etc.) for the Administrator of the camera. The
settings can be referenced by the SNMP Manager.
(4) [Administration Function Name]
Set the camera name used for administration. The settings can be referenced by the SNMP
Manager.
If this field is left blank, "VB-C60" will be used by default.
(5) [Installation Location]
Set information regarding the installation location of this camera. The settings can be
referenced by the SNMP Manager.
Tip
The information set in the camera is read-only from the SNMP Manager.
Use the SNMP Manager SNMP MIB2 (supporting RFC1213).
The camera's SNMP does not support IPv6.
Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
1
1
1-11