Canon VB-C60 Operation Manual page 85

4. Operate the camera to adjust the top edge, bottom edge, left edge, right edge, telescopic or
wide angle to desired positions, and then click each [Get value] button.
The loaded view restriction can be checked in the view restriction setting entry box or view
restriction preview frame.
5. Click [Apply].
Check the status list to make sure the settings have been applied correctly, and then click the
[Save view restriction settings] button to save the settings in the camera.
Note
If you have changed the setting for the camera mounting method, recapture the panorama
image and register it again.
The panorama preview may be slightly different from the actual image. After view
restrictions have been set, be sure to confirm with VB Viewer that the view restrictions have
been reflected correctly.
Confirm the settings using VB Viewer. (View restrictions are not applied to Admin Viewer.)
If the image stabilizer setting is changed after view restrictions have been set, the set view
restrictions no longer agree with the view restrictions applied during operation (
If the image stabilizer or electronic zoom setting has been changed, check the view
restriction settings again.
View Restriction Setting Tool
P. 3-22).
2-19