Connecting The Projector To The Computer; Connecting To Rgb Monitor Output Terminal (Analog Connection) - Canon REALiS SX800 User Manual

Connecting the Projector

Connecting the Projector to the Computer

Connect the projector to the computer.
Before connecting the cables, turn off both the projector and computer.

■Connecting to RGB Monitor Output Terminal (analog connection)

Supplied computer connection cable (Input signal type: [ANALOG PC-1] - P54)
Computer
Monitor output
terminal
(mini D-sub 15-pin)
Audio output terminal
(AUDIO OUT)
Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
turns down the sound.
Supplied computer connection cable
(SX80 II)
Supplied VGA cable (SX800)
To input a corresponding
audio signal:
Commercial audio cable
To ANALOG PC-1/
DVI-I IN
To ANALOG
PC-1
40
Projector
To AUDIO IN