Top Control - Canon REALiS SX800 User Manual

Part Names

Top Control

KEYSTONE button
Corrects keystone distortion. (P60)
[ ] [ ]: For keystone adjustment.
Press KEYSTONE and then AUTO SET to
adjust the keystone automatically.
• Moves the image up and down when
the D. image shift is selected. (P64)
• [ ] [ ]: Adjust the vertical position.
MENU button (P76)
Displays a menu on the screen.
AUTO SET button (P53)
Performs input signal setting,
keystone distortion adjust-
ment, focusing (SX80 II), and
screen color correction (SX80
II) automatically.
INPUT button (P55)
Switches among input signals.
WARNING lamp (P138)
Flashes red when a problem has been
detected on the projector.
POWER button/lamp (P49, P68)
Turns the projector on or off.
Green: The projector is on.
Flashing green: The projector is be-
ing turned on.
Red: The projector can be turned on.
Flashing red: The projector is being
turned off (the lamp is being cooled).
AUTO PC button (P57)
Adjusts tracking and so on automatical-
ly in accordance with signal from a
computer when ANALOG PC-1 or ANA-
LOG PC-2 is selected.
LED illumination lamp (P106)
Indicates the projector status with LEDs.
Blinking from the left: The projector is being turned on.
Blinking from the right: The projector is being turned off.
Middle LED flashing slowly: The image is being blanked out.
Left and right LEDs flashing slowly: The image is freezing.
28
FOCUS button (P59)
Adjusts focusing.
[ ] [ ]: For rough adjustment.
[<] [>]: For fine adjustment.
In SX80 MarkII, press FOCUS and
then AUTO SET to adjust the focus
automatically.
ZOOM button (P58)
Adjusts the image size.
[ ] [ ]: For rough adjust-
ment.
[<] [>]: For fine adjustment.
OK button (P78)
Determines the item se-
lected from the menu.
Pointer/VOL button (P77, P71)
Adjusts the sound volume.
[<]: Decreases the volume.
[>]: Increases the volume.
Selects the upper, lower, left or
right item in the menu.