Selecting An Input Signal Type (Analog Pc); Selecting An Input Signal Type (Video/S-Video) - Canon REALiS SX800 User Manual

Setting Display Status
Selecting an Input Signal Type (ANALOG
PC)
[Input signal select]
HDMI
DIGITAL PC
ANALOG PC
Input signal select
You can select a proper resolution if auto
PC adjustment function (P57) cannot
project a correct image from a computer.
Press the OK button to accept your setting
and then press the MENU button.
Select an input signal corresponding to
the resolution of the computer.
• For the signal types supported by the
projector, see the table on page 150.
Selecting an Input Signal Type (VIDEO/S-
VIDEO*)
[Input signal select]
COMPONENT
VIDEO/S-VIDEO
USB
Display settings
You can select a proper signal type if a
video image from your AV equipment is
not projected correctly.
Press the OK button to accept your setting
and then press the MENU button.
• [Auto] is the factory default.
• Refer to the User's Manual of your AV
80
HDMI
DIGITAL PC
ANALOG PC
* is only applicable to SX80 MarkII
Input signal select
equipment connected to the projector to
confirm the input signal type.
COMPONENT
VIDEO/S-VIDEO
USB
Display settings