Canon REALiS SX800 User Manual page 41

Commercial or supplied VGA cable (Input signal type: [ANALOG PC-2] - P54)
Computer
Monitor output
terminal
(mini D-sub 15-pin)
Audio output terminal
(AUDIO OUT)
Monitor output
terminal
(mini D-sub 15-pin)
Audio output terminal
(AUDIO OUT)
• If you use a commercial VGA cable, make sure to use a full connected VGA cable in
which all pins are connected; otherwise, an image may be projected improperly.
• Use an audio cable without a built-in resistor. Using an audio cable with a built-in resistor
turns down the sound.
Commercial VGA cable
To input a corresponding
audio signal:
Commercial audio cable
Supplied VGA cable (SX800)
To input a corresponding
audio signal:
Commercial audio cable
41
Connecting the Projector
Projector
To ANALOG PC-2/
COMPONENT IN
To AUDIO IN
To ANALOG PC-2/
COMPONENT IN
To AUDIO IN