Running A Slideshow; Setting A Slideshow Interval; Finishing Projection - Canon REALiS SX800 User Manual

Running a Slideshow

You can run a slideshow that projects multiple images stored in the digital camera at cer-
tain intervals.

■Setting a Slideshow Interval

By setting projection intervals in [Slideshow interval] from the menu, you can run a slide-
show of the images (with PictBridge or from a USB flash memory) connected via USB.
Set the slideshow interval by following the steps below.
1
Press the MENU button to display the menu.
Remote control
2
Select [System settings] tab with [<] / [>], and select [Slideshow interval] with [ ] / [ ].
Remote control
3
Set the interval (minute:second) other than "--:--" with [<] / [>].
To stop the slideshow, set as "--:--".
Remote control
4
Press the MENU button to exit the menu.
It may take a certain time depending on the screen size.

■Finishing projection

To finish projecting images using PictBridge, turn off the power to the PictBridge enabled
equipment.
Then, remove the USB cable from the equipment.
Projecting an Image from a Digital Camera (SX80 II)
Top control
Top control
Top control
117