Canon REALiS SX800 User Manual page 131

4
If the SMTP mail server authentication is required, click [Mail auth], enter appropriate
values in the following field, and click the [OK] button.
Select one of the following four authentication method in [Mail authentication]. Select
[OFF] if the mail authentication is not required (the factory default is [OFF]).
[LOGIN (SMTP authentication)], [CRAM-MD5 (SMTP authentication)],
[USER/PASS (POP before SMTP)], [APOP (POP before SMTP)]
Setting items:
[User name]:
[Password]:
[Confirm password]:
[POP3 server IP address]:
[POP3 server port number]:
[POP before SMTP response time]: The wait time between the POP3 authentication and
The user name for the mail authentication
The password for the mail authentication
The password for confirmation
The IP address of the POP3 server
The port number of the POP3 server
(The factory default: 110)
the transmission to the SMTP mail server
(millisecond, the factory default: 300)
131
Setting Network (SX80 II)