Adjusting the Focus
You can adjust the focus with the FOCUS button. The projection image may be out of
focus if the projection distance is beyond the range of 1.2 m (3.9') to 9.1 m (29.6'). Move
the projector installation position if such is the case. (P35)
■Auto focusing (SX80 II)
Press the FOCUS button, and then the AUTO SET button.
If you select [16:9 D. image shift] for [Screen aspect], the auto focus function will be dis-
abled.
■Manual focusing
1
Press the FOCUS button to pop up a window shown at the lower right.
Remote control
2
Press the pointer buttons to adjust the focus.
Remote control
[ ] / [ ]: Rough adjustment.
[<] / [>]: Fine adjustment.
3
When the focus is adjusted optimally, press the OK button or the FOCUS button.
Top control
Top control
59
Adjusting Image