Connecting To A Computer - Canon LV-X4E Owner's Manual

Connecting to a Computer

Cables used for connection
• VGA Cable (HDB 15 pin) (Only a cable is supplied.)
• USB Cable
• Audio Cables (Mini Plug: stereo)
( = Not supplied with this projector.)
Monitor Input
VGA cable
RGB IN-2/ RGB OUT
Note:
• If you wish to use Page e e d d buttons on the remote control unit, connect USB port
of your computer to the USB socket of the projector. (p9,12 and 44)
• When connecting AUDIO OUT to external audio equipment, the projector's built-in
speaker is disconnected.
Note:
When connecting the cable, the power cords of both the projector and
the external equipment should be disconnected from AC outlet.
Audio cable (stereo)
Audio Output
USB cable
USB port
VGA cable
Monitor Output
RGB IN-1/ COMPONENT IN
(or RGB IN-2/ RGB OUT)
RGB IN- 1 / AUDIO
R IN L VIDEO IN
COMPONENT IN
S-VIDEO IN
SERVICE PORT
RESET
RGB IN-2 /
RGB OUT
This terminal is switchable. Set up the
terminal as either Computer input or
Monitor output. (See Page 43.)
External Audio Equipment
Audio Input
USB
COMPUTER
AUDIO IN
COMPUTER
AUDIO IN
A AUDIO OUT
AUDIO OUT
(stereo)
Installation
Audio cable
(stereo)
17