Adjusting Keystone Distortion; Auto Adjustment; Manual Adjustment - Canon REALiS SX800 User Manual

Adjusting Image

Adjusting Keystone Distortion

The D.SHIFT/KEYSTONE button corrects the keystone distortion.
• Keystone can be adjusted within the range of ± 20 degrees. If the keystone distortion is
too large to adjust, move the projector installation position. (P35)
• The amount of adjustment may be smaller depending on type of input signal.
• The result of keystone adjustment is memorized. If you place the projector at the same
position, the keystone adjustment is not necessary.
• Signals are processed digitally when keystone distortion is corrected. The image may
look different from the original one. In addition, the aspect ratio of the image may change.
• If you select [16:9 D. image shift] for [Screen aspect], the keystone adjustment will be dis-
abled. Project the image at right angle to the screen.

■Auto adjustment

Press the D.SHIFT/KEYSTONE button, and then the AUTO SET button.

■Manual adjustment

1
Press the D.SHIFT/KEYSTONE button to pop up a window shown at the lower right.
Remote control
2
Press the pointer buttons to adjust the focus.
Remote control
[ ]: Reduces the length of
the upper edge.
Top control
Top control
60
[ ]: Reduces the length of
the lower edge.