Setting For Slideshow (Sx80 Ii); Setting Up The Remote Control Channel - Canon REALiS SX800 User Manual

Setting for Slideshow (SX80 II)

[Slideshow interval]
HDMI
DIGITAL PC
ANALOG PC
Slideshow interval
You can project the images stored in a
PictBridge-compatible device (P114) or a
USB flash memory (P118) in the slide-
show.
Use [<] / [>] to set the interval (minutes:
seconds) of projection (60 minutes = max-
imum).
Set [-- : --] if no slideshow is performed.
When the setting is completed, press the
MENU button.
• [-- : --] is the factory default.
• The maximum length of slideshow time
is 60 minutes (60:00).
• Use the USB file browser for the projec-
tion from the USB flash memory. For
more details, refer to the page 120.

Setting up the Remote Control Channel

[Other settings] - [Remote control]
COMPONENT
VIDEO/S-VIDEO
USB
System settings
You can set different channels to different
remote controls, if you use two projectors
at the same time.
Press the OK button to accept your setting
and then press the MENU button.
• The factory defaults is [Ch1] for both
• After changing the channel on the
Selecting a Channel on the Remote Con-
trol
You can change the channel on the
remote control as follows:
107
Setting Various Function
HDMI
DIGITAL PC
ANALOG PC
Other settings
Remote control
Ch1 Select the channel of the remote control
used for this projector, and press the OK
Ch2 button.
projector and remote control.
menu, be sure to change the channel of
the remote control, too.
Ch1 Press the OK button and [ ] for 3 sec-
onds at the same time.
Ch2 Press the OK button and [>] for 3 sec-
onds at the same time.
COMPONENT
VIDEO/S-VIDEO
USB
System settings