Package Content - Wahlberg Roll Down Manual

Introduction
Thank you for selecting the Roll Down, a DMX controlled Roll Down from Wahlberg Motion Design.
Before using the product for the first time, please read this manual carefully. Failure in handling
can cause injury of persons and/or damage the product.

Package content

1× Roll Down
1× PowerCON NAC3FX-W-TOP female plug for power cable
1× User manual
1× Cheat sheet
Description
Roll Down is a Roll Down for stage use, mainly for use in theatres, shows and concerts.
It lifts fabrics in and out of the stage sphere at a maximum load of 35 kg up and down. The lifting
height is 18 m and the lifting speed is between 5 cm/s and 183 cm/s.
The Roll Down is controlled by the standard DMX signal, so a usual lighting desk can be used to
control the movement, programmed as any light.
For a limited number of Roll Downs, a standard lighting desk can be used, but when many Roll
Downs are used, more advanced desks should be used to maintain easy control of the units.
The Roll Down uses 6 channels of the DMX-line, and they control the position, speed, limits, and
reset functions.
The Roll Down has an advanced internal positioning system with 16 Bit, used for finding the
position desired by the operator. With a 16 bit positioning channel (channel 1 MSB and channel 2
LSB) the operator can set the desired position, and the Roll Down will run to this position, at the
maximum speed (channel 3).
Channel 4 is used as a safety channel. The motor will not run using DMX if channel 4 is not enabled.
With channel 5 and 6 it is possible to set the soft TOP and BOTTOM limits of the movement.
Channel 5 is also used for resetting the Roll Down, when powering up if the position was not saved
when shut down.
On the Roll Down it is also possible to adjust the hard TOP and BOTTOM limits and, in that way,
set the absolute span of motion regardless of any DMX control.
Multiple Roll Downs are easily daisy chained with power in-out and DMX in-out, allowing to create
advanced and dynamic movements with several Roll Downs working together in the same
installation.
249.805.013 6 Date: 2021-12-09