Introduction; Package Content; Description - Wahlberg Track Runner Series User Manual

Introduction

Thank you for selecting the Track Runner Series, a DMX controlled motor system from Wahlberg
Motion Design. Before using the product for the first time, please read this manual carefully.
Failure in handling can cause injury of persons and/or damage the motor.

Package content

1× Track Runner
2x End-stop rod
1× powerCon TRUE1 male plug NAC3MX-W(-TOP) for power cable connection
1x User Manual
1x Cheat sheet

Description

The Track Runner Series makes your moving heads or scenic elements fly or move smoothly where
speed, positing and range all are controlled via DMX directly from a lighting desk using a wireless
transmitter (ordered separately).
With the on-board mounting bracket, power and DMX outlets, it is easy to attach any DMX unit
you would like to control from the moving element.
It runs on a UniBeam track system in a horizontal orientation with no limit on how long the track
can be, except for the maximum range of the wireless DMX signal or the length of a spiral cable
(ordered separately).
Safety functions
The control system ensures that the motor is only powered when:
•
The DMX signal is reliable.
•
The wireless DMX transmitter is within range and linked to the unit (when used)
•
The speed control channel is on (more than 0%).
•
The motor is instructed to move.
•
No overload.
The product should only be operated by an experienced lighting-desk-operator. The lighting desk
must be programmed according to the manual, so the unit will stop when the speed is put to 0 %.
It is also possible for the user to stop the moving elements by disconnecting the mains power.
352-353.805.006
7
Date: 2019-07-02