Adjustable Parameters - Wahlberg Roll Down Manual

Save changed value
The display shows:
Press
Where X is an increasing number from 1 to 20.
Then press and hold
The top line of the display counts up to 20 then shows OK.
The value is now saved in the memory.

Adjustable parameters

Menu
MAN SPEED
MAN UP/DWN
DMX ADDRESS
TAC RANGE
RAMP TIME
SPEED MAX
SP MIN UP
SP MIN DWN
E STOP
ADV. MENU
SLACK DELAY
POS OUT
UNSAFE MODE
NOM. FREQ
REVERSE DIR
QUICK SLACK
PRECISION
SLS DIST
SLS TIME
SLS ON
SLS RESET
TOT DIST
TOT TIME
TOT ON
FACTORY RST
MAN SPEED and MAN UP/DWN are used for manual control of the motor.
249.805.013
to change the top line to:
Description
Speed for manual driving
Run the motor manual from the menu
DMX start address
Tacho range
Ramping time from 0 to max speed
Maximum speed
Minimum speed UP
Minimum speed DWN
Enable/disable emergency stop
Show advanced menu
Delay from slack activation to stop
Position feedback
Disable all limit switches
Power input frequency
Reverse direction of up and down
Stop quickly when slack activates
Tolerance for settling
Kilometers moved Since Last Service Not adjustable
Hours moving Since Last Service
Hours on Since Last Service
Reset Since Last Service parameters
Kilometers moved in total
Hours moving in total
Hours on in total
Reset to factory default settings
Range
200 – 1500
MOTOR UP / MOTOR DOWN
1-506
1-99,999
0.5 – 10.0
500 – 5,000
50 - 1,000
50 - 1,000
OFF/ON
OFF/ON
0 – 9999
OFF/ON
OFF/ON
50/60
OFF/ON
OFF/ON
5 – 100
Not adjustable
Not adjustable
NO/YES
Not adjustable
Not adjustable
Not adjustable
NO/YES
22
Default
1500
1
10,000
1.0
3,000
200
200
OFF
OFF
0
OFF
OFF
50
OFF
OFF
15
NO
NO
Date: 2021-12-09