Wahlberg Roll Down Manual page 26

Adjusting hard limit switches
WARNING! There must be at least 1½ round left on the tube when the Roll Down is at the hard
BOTTOM limit.
Attention! Be careful that the hard TOP limit is not set in a position where the fabric and any
counter weight can run into the Roll Down itself, this may damage the Roll Down or fabric.
The hard limit switch determines the maximum and minimum travel distance of the Roll Down.
The hard limits are adjusted by rotating the white levers using the screws for hard TOP and
BOTTOM limit.
When the hard TOP limit is activated on a unit with start channel 1, the display will show:
When the hard BOTTOM limit is activated on a unit with start channel 1, the display will show:
The hard limit switch makes a 'click-sound' when the limit switch is pressed or released.
249.805.013 26 Date: 2021-12-09