Launching The Viewer; Shutting Down The Viewer; Connecting From Admin Tools - Canon VB-M40 Operation Manual

Launching the Viewer

Launching the Viewer
Viewer operations can be performed via a web browser.
First, access the top page of the camera.
Important
• The Canon Inc. Certificate must be registered on a PC that is
using the Admin Viewer. Refer to "Certificate Registration" in
"Chapter 3 Top Page of the Camera" (P. 3-4) to register the
certificate included in the Setup CD-ROM.
• This Operation Guide explains relevant operations based on
the IP address "192.168.100.1" (factory default setting). You
must enter the actual IP address set for the camera when
following instructions.
Access "http://192.168.100.1/" via the web browser.
1
Click [Admin Viewer] or [VB Viewer] according to the
2
user.
For [Admin Viewer], enter the user name and
3
password.
Refer to "User Authentication" in "Chapter 3 Top Page
of the Camera" for information on the user name and
password.
6
-4
The viewer is launched.

Shutting Down the Viewer.

Close the web browser in the viewer to shut down.

Connecting from Admin Tools

Only the administrator can connect to this viewer.
Launch Admin Tools.
1
(Refer to "Chapter 5 Admin Tools" (P. 5-4) for
information on opening Admin Tools.)
2 Click [Admin Viewer].