Canon VB-M40 Operation Manual page 127

B203 Audio message send error [info]
Description audio message send error %1 [%2] (B203)
%1 Message type
%2 Error number
Meaning The audio message could not be sent.
B204 Audio message reception failure [info]
Description audio message recv error [%1:%2] (B204)
%1 Error notification number
%2 Cause of error
Meaning The audio message could not be received.
B301 Audio device error [err]
Description cannot use audio device for %1 [%2:%3] (B301)
%1 Transmission/reception type (rx | tx)
%2 Error handling (open | write | flush)
%3 Error number
Meaning An audio device error was detected.
Countermeasure If the error is not reset automatically, arrange for servicing.
B401 Audio device initialization failed [err]
Description audio device initialization error [%1] (B401)
%1 Error number
Meaning The audio device could not be initialized. The audio server stops.
Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing.
B402 Audio server initialization failed [err]
Description audio initialization error [%1] (B402)
%1 Error number
Meaning The audio server could not be initialized. The audio server stops.
Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing.
B403 Settings change failed [err]
Description cannot set config [%1:%2] (B403)
%1 Error notification number
%2 Error number
Meaning The settings could not be updated. The audio server stops.
Countermeasure If the problem persists after rebooting, the camera is faulty. Arrange for servicing.
List of Log Messages
7
7
-13