Saving/Deleting A Panorama Image; Opening A Panorama Image From Image Files/Saving As Image Files - Canon VB-M40 Operation Manual
Ptz network camera
Hide thumbs
Also See for VB-M40:
- Operation manual (157 pages) ,
- Administrator's manual (104 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
Note
• While a panorama image is being captured, the image
stabilizer function is temporarily disabled.
• While a panorama image is being created, the connection of
anyone other than Administrators is cut off.
• When a small value is entered for [Maximum Frame Rate:
Image Transmission] under [Video] > [JPEG] in the Setting
page, panorama capture is slowed down.
When the capture is complete, click [Finish Panorama
2
Creation] if the image is satisfactory.
Saving/Deleting a Panorama Image
How to Save
Click [Save to camera], and then click [OK] in the
displayed dialog box.
The panorama image is saved to the camera.
How to Delete
To delete the panorama image saved to the camera,
1
click [Delete] and in the dialog that appears click [OK].
The image in the panorama image display area will be
deleted.
Click [Save to camera].
2
The panorama image saved in the camera is deleted.
Panorama Creation Tool
Opening a Panorama Image from Image
Files/Saving as Image Files
You can open image files as a panorama image or save a
captured panorama image as image files. Only JPEG
image files created using Panorama Creation Tool can be
handled.
5
How to Open from Image Files
Click [Load from file] and then select the image file you
want to use in the displayed dialog box.
How to Save
Click [Save to file] and then select the folder you want to
save and enter the file name in the displayed dialog box.
5
-11
- Quick Links:
- Initial Settings
Hide quick links:
Advertisement
Table of Contents
