Downloading Log Files; How To View Logs - Canon VB-M40 Operation Manual

A d [Date & Time]
Set the date and time of the log you want to show using
the filter function.
Select the [Specify start date & time] or [Specify end
date & time] checkbox to set the date and time.
A f [Apply filter]
Show the filtered logs in the log display area.
A g [Search for]
Enter the character string for which you want to search.
A h [Match case] checkbox
Specify whether or not to enable case sensitivity in
search commands. When selected, character strings
perfectly matching the case in the [Search for] field are
searched.
A j [Previous]/[Next]
Click [Next] to move down and [Previous] to move up
in the search results for A k [Search].
A k [Search]
Search logs containing the character string searched
in the displayed log list and display them.
Note
Log Viewer only has a log viewing function and logs cannot be
deleted.

Downloading Log Files

When Log Viewer is launched, the latest log files will be
downloaded and displayed automatically.
To download a new log file list, click [Download]. A
[Download] dialog box is shown where you can select
[Internal memory] or [SD card] as a download source.
When the list has been downloaded, a dialog box
showing the log file list opens. Select the log file you want
to view and click [Download], and the selected log file will
be downloaded.
5
-32

How to View Logs

The log contains the following information.
• Code
For the log code, see "List of Log Messages" (P. 7-8).
The log code is shown together with one of three icons
corresponding to the applicable level.
If the log has no log code, no icon is shown.
Error Level
Information Level
• Date & Time
The date and time at which the log was generated.
• Message
A message regarding the log.
Saving a Log to a File/Opening a Saved Log
You can save the displayed log and view previously
saved log files.
How to Save
Click [Save to local file] and save using the [Save as]
dialog box.
How to View
Click [Open local file] and select a log file using the [Open
file] dialog box.
Copying/Searching Logs
You can copy the displayed log to the clipboard or search
logs.
How to Copy
Click to select the log you want to copy, and then click
[Copy].
How to Search
Enter the character string for which you want to search in
[Search for] and click [Search].
If the searched log is found, it is shown as selected.
Click [Previous] or [Next] to search the log above or
below. Lines of logs found are shown as selected.
Warning Level