Checking The Camera Image - Canon VB-M40 Operation Manual

Checking the Camera Image

Once initial settings are complete, check the image on the
camera with the VB Viewer. When doing so, set the PC
network settings to comply with the IP address and
subnet mask settings on the camera.
Click to select the camera's MAC address which will be
1
checked, and then click [Detailed Settings].
Click to select
This will launch the web browser and display the top
2
page of the camera. Click [VB Viewer].
The viewer launches and displays the camera image.
If the top page of the camera does not appear or the
VB Viewer does not launch, see "Troubleshooting"
(P. 7-6) in "Chapter 7 Appendix."
Important
Do not change the camera HTTP port from 80 if you want to
open the setting page by clicking [Detailed Settings]. See
"HTTP Server" (P. 4-19) for more information on HTTP port
settings.
2
2
-5