Canon VB-M40 Operation Manual page 82

8 [Preset] tab, [Preset Tour] tab
Switch between the preset setting tab and preset tour
setting tab.
9 [Preset/Home Position] selection box
Select the preset (from 1 to 20) or [home position] you
want to set.
A q [Quick Registration]
Load the current camera position and the other
detailed settings of A s , and register them as preset
settings.
A a [Preset Name]
You can enter a preset name of up to 64 characters.
You can set a name in alphanumeric characters. Be
sure to enter a single-byte alphanumeric preset name.
When the [Home Position] is selected in 9, the preset
name function is grayed out.
In a [Preset Name], ASCII characters (spaces or
printable characters) can be used.
A s [Detailed Settings]
Show the detailed settings.
A s -1 [Show in viewers] checkbox
Select this checkbox to use presets in the viewer.
When the [Home Position] is selected in 9, this
function is grayed out.
A s -2 Camera Parameter
Enter the center angle of the desired angle in
[Pan] and [Tilt]. In [Zoom], enter the view angle.
• Camera Angle
[Pan] ..... Set the pan position of the camera.
[Tilt] ....... Set the tilt position of the camera.
[Zoom] .. Set the viewing angle of the camera.
• [BLC] (Back Light Compensation)
Select [OFF] or [ON] for the BLC setting of the
camera.
• [Focus Mode]
Select [Auto], [Manual], or [Fixed at infinity] for
the focus mode of the camera. (P. 6-13)
• [Smart Shade Control]
Select [OFF] or a level from [1] (weak) to [7]
(strong) for the smart shade control setting of the
camera.
• [White Balance]
Set the white balance of the camera to [Auto] or
according to the light source of the condition in
which it is used. For details on light sources, see
P. 4-10.
• [R Gain], [B Gain]
If white balance is set to [Manual], set the
respective gains to a value between 0 and 1023.
5
-18
A d [Get camera info]
Load the current camera angle, the 5 [Focus]
settings, or 6 [Smart Shade Control] settings of the
image display area, and reflect them in the panorama
screen or camera parameter settings.
A f [Preview settings]
Use the camera parameter values that are being edited
to adjust the camera angle, 5 [Focus], or 6 [Smart
Shade Control], and preview them in the image display
area.
A g [Clear settings]
Delete the settings for the preset selected.
A h [Restore settings]
Clear the settings you have specified on the screen of
the tool and restore the settings saved in the camera.
A j [Save settings]
Save the edited preset settings in the camera.
If presets have been set, be sure to save the settings
by clicking [Save settings].