Setting The Preset - Canon VB-M40 Operation Manual

Setting the Preset

A preset can be set in one of the following two ways.
Setting from Camera Angle in the Image
Display Area
Select the preset you want to set from the [Preset/Home
1
Position] selection box, and then fill the [Preset Name]
field.
Click the [Obtain/release Camera Control] button to
2
obtain the control privileges of the camera.
Operate the camera from the image display area, set it
3
to the desired position and click [Quick Registration].
Use the preview frame of the panorama
screen to set presets.
Use the preview frame of the panorama screen to set
presets.
1 Select the preset you want to set from the [Preset/Home
Position] selection box, and then fill the [Preset Name]
field.
Be sure to enter the preset name.
Drag to move or resize the preset preview frame
2
shown on the panorama image to set the preset.
If you click on the panorama image, the preview frame
will move to center on the clicked point.
Click [Preview settings].
3
The settings are reflected in the preview frame on the
panorama screen and the image display area.
If you previewed incorrect settings, etc., and want to
restore the settings registered in the camera, click
[Restore settings].
Click [Save settings].
4
Specifying Detailed Settings
If you want to fine-tune the camera angle or to adjust the
image, etc., click [Detailed Settings] and specify the
detailed settings before saving the preset settings in the
camera.
Select the [Show in viewers] checkbox.
1
2 Click [Get camera info].
The camera parameters in the image display area are
loaded to [Detailed Settings].
Fine-tune the camera angle and adjust the image
3
quality with focus or smart shade control while
checking the image.
Click [Preview settings].
4
The settings are reflected in the preview frame on the
panorama screen and the image display area.
If you previewed incorrect settings, etc., and want to
restore the settings registered in the camera, click
[Restore settings].
Preset Setting Tool
5
5
-19