Error Codes (Mf6595Cx/Mf6595/Mf6590 Only) - Canon imageCLASS MF6540 Basic Operation Manual

Error Codes
An error code is a four-digit code shown on an ERROR TX REPORT or an ERROR RX
REPORT when an error occurs.
For details on reports, see Chapter 11, "Appendix, " in the Reference Guide.
See the table below for individual error codes.
Error Code
#0001
A document may be jammed.
#0003
–
–
–
(MF6595cx/MF6595/MF6590 Only)
Description
An attempt was made to send a
document of 24 7/8" (630 mm) or
longer from the ADF.
A document takes a long time to
send because it contains too much
data.
A document takes a long time to
receive.
Action
Remove the jammed document.
– Divide the document into smaller
parts and send from the platen
glass.
– Reduce the scanning resolution
before sending.
– Contact the other party and ask
them to reduce their scanning
resolution or divide the document
into smaller parts for sending.
11-13