Canon imageCLASS MF6540 Basic Operation Manual page 240

FAX SETTINGS (MF6595cx/MF6595/MF6590 Only)
4. RX SETTINGS
1. ECM RX
2. FAX/TEL OPT. SET
1. RING START TIME
2. F/T RING TIME
3. F/T SWITCH ACTION
3. DRPD:SELECT FAX
4. INCOMING RING
OFF
ON
RING COUNT
Sets the reception functions.
Sets whether the ECM (Error Correction Mode) reception is
activated.
ON
–
– OFF
Sets the optional items in the <FaxTel> mode. (See Chapter 4,
"Sending and Receiving (MF6595cx/MF6595/MF6590 Only)," in
the Reference Guide.)
Sets the time the machine takes to check whether a call is a fax
or a voice call. (0SEC–30SEC)(6SEC)
Selects the ring length for voice calls. (15SEC–300SEC)(15SEC)
Selects whether the machine switches to the receive mode after
the ring time has elapsed, or whether if disconnects the call.
RECEIVE
–
– DISCONNECT
Selects the ring pattern for fax calls.
– DOUBLE RING
– SHORT-SHORT-LONG
– SHORT-LONG-SHORT
– OTHER RING TYPE
– NORMAL RING
Sets whether the external telephone rings when it receives a
voice call, enabling you to answer the call. This function is only
available when <RX MODE> is set to <FaxOnly> or <FaxTel>.
The telephone does not ring when it receives a voice call. (In the
Sleep mode, the telephone may ring one or two times.)
The telephone rings when it receives a voice call if an external
telephone is connected.
Sets the number of incoming rings before the machine answers.
(1TIMES–99TIMES)(2TIMES)
12-15