Canon imageCLASS MF6540 Basic Operation Manual page 90

8
Press [Start].
When you set the document on the platen glass, press [Start] for each page. When scanning is
complete, press [OK].
– A maximum of 1/8" (2 to 3 mm) margin will be produced between the two reduced documents in 2
on 1 combination copying.
– To cancel all settings, press [Reset].
– When you switch the mode by pressing the mode keys such as [FAX], all settings will be also
canceled. If you want to keep the settings, store the settings in <STANDARD SETTINGS> in <COPY
SETTINGS>, See "STANDARD SETTINGS," on p. 12-10.
3-15